PDA

View Full Version : f%#@ing electrical!!!


hstl
03-06-2009, 10:44 PM
so i finally got my zx put back together, i turn it over ( it doesn't start) and i bumbed the high beams... everything goes dead!!! i can't find fuses to save my life!!! anyone know where they are at, or if it even has fuses? (1985 300zx non-turbo.)

Insurgent
03-07-2009, 05:52 AM
weak battery could also cause this, you'll get enough juice to turn it over then pop the lights on and thats it.

Insurgent
03-07-2009, 06:05 AM
try jumping it then start pulling fuses

hstl
03-07-2009, 07:22 AM
the batterry is brand new, all fuses are good, engine cranks over but will not ignite. i can't smell gas from the tail pipe either, so it ain't flooded.

az03g
03-07-2009, 08:22 AM
i thought you couldn't find the fuses? The car definitely has fuses.

there may be a short in the lights? not starting could be a number of things...

check spark, fuel, and timing...

hstl
03-07-2009, 09:34 AM
well, i found the fuses shortly after writing that post. I don't have spark, not sure why not, everything is connected. where do i start?

zander
03-07-2009, 10:58 AM
distributor right? check the plug wires, if those are good inspect the cap and rotor, make sure there's no gunk on the contact points, or worn contact points. I don't know how you can test it, but test the main coil.

James
03-07-2009, 11:07 AM
you could just replace them. cap and rotor isn't expensive at all

hstl
03-07-2009, 09:31 PM
okay, bought and installed; rotor, cap, wires and new plugs. all conected... and still no ignition!!!!! i swear this car hates me!!
i'm pulling out the multi-meter right now, we'll see if shes got power to the coil. then one by one i'll check the next connections in the chain.... i HATE electrical!!

melly mel
03-07-2009, 09:32 PM
You mess with the ECU at all? Disconnect it by any chance while doing other things?

hstl
03-07-2009, 10:21 PM
no, i just took a reading on the coil, distributer, and spark plug wires. all have power, they just aren't getting it at the right moment. it's just timing...
i hope.

hstl
03-07-2009, 10:36 PM
i'm done for tonight, my head is pounding.