Video of my car with a couple of 22 PSI pulls

[4DRHTRD]

OK for those who don't know, here's the breakdown of mods:
ATP Turbo kit with 3071R which includes their cold air intake and catless DP
XEDE piggyback - only tuning so far is to stop fuel cut and to set boost to 22 PSI, it's still richer than 11.0 on my scans
TurboXS hybrid BOV
Custom liquid to air intercooler
Stock "cat back" exhaust
Although you see a Blitz SBC-iD EBC boost gauge it is only being used as a gauge.

I did some quick pulls, I don't trust doing a super hard launch in the car right now so don't expect to see it in the video.
1st is a rolling pull 1st through 4th gear
2nd is a slow start 1st through 3rd
3rd is a 6th gear pull at part throttle from under 2K rpm to show you the driveability of the car

Sorry you can't make out the boost gauge better in the video but you can just make out the #'s. If someone can edit the original AVI file from the camera and do a closeup let me know, I'll upload it to my FTP server

NO that's not where my boost gauge goes normally.

http://www.azspeed6.com/movies/22-psi.wmv

ENJOY!!
X-posted :)

[4DRHTRD]

Faster site - http://putstuff.putfile.com/49623/7222439

[az03g]

nice! when you taking that thing out to the track? a bunch of us are heading to speedworld March 3rd... :)

[EurojetRonnie]

You should get that VES dump so you can keep the stock CB

[4DRHTRD]

I do have a VES dump and that video is with the stock catback... :)
I won't head out to the track until I get it tuned March 10th by Shiv in So. Cal.
As soon as I have some dyno #'s I'll take her out, I also want to make sure it's safe.

[EurojetRonnie]

I do have a VES dump and that video is with the stock catback... :)

Sweet, Im thinking of selling my CB and getting that. My exh is sooooooooooooooooooooooooooooooooooooo dam loud

[4DRHTRD]

Video of my VES setup.
http://www.azspeed6.com/movies/MS6_VES_Drive.wmv